NEWS
Methods of common fault repair car

The car in the long-term use will inevitably be some small problems, small fault, not to mention the second-hand car. In particular, fuel consumption, tire braking system is the most prone to security risks. The aluminum alloy forging tell you these conditions should be how to deal with?What is the repair methods of common fault car?

A common fault: Tire punctured by a foreign body.

The tire is the most easy to be worn and damaged. Especially when the road will always be stone or nails punctured tyres, many owners in order to save, to the side of the road repair shop repair it to go ahead, but this method can only be a temporary remedy when running at high speed,there will be a big security risk. The aluminum alloy forging suggestions for professional repair shop owners were added, because the repair shop professional will have to remove the tirespecial tools, and repair would be more secure with special heating after vulcanizing machine.

Fault two: fuel consumption increases greatly.

In the car after a period of time, many owners will find oil suddenly increased by more than ten percent, are in the offing. In fact, the increase in fuel consumption also indicates that the vehiclehas the potential failure. It is first necessary to understand the reasons for the increase in fuel consumption, and then be solved. Increase fuel consumption on a number of factors. For example, clutch slipping can make the engine rpm is lost, resulting in fuel consumption soared,the need for the timely replacement of the clutch pressure plate and drive wheel.

Fault three: brake system failure.

The brake system failure including: brake pedal travel is too large, slow brake, braking efficiencyis very low and even loss, braking distance increases. There are three kinds of methods toeliminate the fault. Continuous brake pedal pedal, such as increased gradually and elasticfeeling, but pause for a while after the pedal is still very low, the air brake system, the brake system with exhaust. The aluminum alloy forging said foot brake problems, but on a few timeswhen the pedal braking effect is very good, generally for the brake pedal free travel is too largeor the brake clearance is too large. Should adjust the pedal free travel, and then check thebrake, brake disintegration repair when necessary. Recommended reading: how to judgewhether the replacement tire

For the car appeared all kinds of small fault, the owner must not be ignored, the aluminum alloyforging said it is in the hidden failures to remind you of the vehicle, and timely solve or replacement, can not only ensure the driving safety, but also prolong the service life of the vehicle. So, please take it for granted.

NEWS CENTER+
CONTACT US
Taizhou JiaDe Forging CO.,LTD.(Aluminum Forging)
ADD:Auto&Motor Parts Industrial Zone, Yuhuan, Zhejiang, China
TEL:0086-576-87578555 87350311
FAX:0086-576-87520426
Mob:13706556533
ZIP:317600
E-mail:info@jiadeforging.com
    sales@jiadeforging.com
http://www.jiadeforging.com